10.10 SALE: 15% OFF STOREWIDE, NO CODE NEEDED 10.10 SALE: 15% OFF STOREWIDE, NO CODE NEEDED

ZUHNE Oslo Honeycomb Natural 316 Stainless Steel Kitchen Workstation Sink (60/70/80cm)

$838.00

The workstation sink designed around Singapore kitchens: a recessed tap deck that keeps splashes in the sink, no tap holes to drill in your quartz, and more usable cabinet space. Honeycomb Natural has a bold honeycomb texture that helps hide micro-scratches.

Oslo workstation sink on a light kitchen counter with cutting board and colander in use
Oslo V5 shown.

Why Oslo

Built to Last

316 Marine Grade Stainless SteelTrusted in surgical equipment and on yachts for exceptional resistance to rust and corrosion. Now in your kitchen.
Solid 16 Gauge ThicknessOslo's bowl is 1.5 mm thick (16 gauge) from top to base, about 25% thicker than the 1 to 1.2 mm steel most sinks use, so it helps resist dents. Some sinks thin out toward the bottom. Oslo doesn't.
Rust Covered for LifeA Limited Lifetime Warranty covers rust caused by a defect in the steel, along with other material defects.
Texture That Resists ScratchesThe Honeycomb pattern is embossed into the steel itself. It helps resist everyday scratches, and its bold pattern hides micro-scratches.

Everyday Life

Built Around Real Kitchen Problems

Splashes Stay in the SinkThe tap deck is recessed below the countertop, however the sink is installed, so splashes and drips stay inside the sink and off your counter.
Centre DrainThe 140 mm drain sits at the centre of the bowl, toward the rear, with a 2-stage strainer and a drain cover that doubles as a plug.
No Tap Holes to DrillYour faucet and soap dispenser mount on the pre-drilled deck, not on your countertop, so your quartz or sintered stone needs no drilling.
Drains QuickerThe sink base slopes toward the drain, so water tends to drain quicker and pool less.

Honeycomb: Tough on Scratches, Easy on the Eyes

  • Micro-scratches? Hard to spot. The Honeycomb texture is pressed into the steel. Its bolder pattern helps hide micro-scratches.
  • A bolder look. The honeycomb pattern has a glossier finish than Lunar.
  • Easy to care for. A clear nano coating makes cleaning easier.
Close-up of the Honeycomb texture on the sink bowl beside the soap dispenser
The Honeycomb texture up close.
Lunar texture above and Honeycomb texture below for comparison
Lunar (top) and Honeycomb (bottom).
Whisper-Quiet by DesignZuhne's Pro+ Sound Pads are over 4 mm thick and cover up to 90% of the sink exterior. Most sinks use about 1 mm pads over around 20%. Running water and clattering pots stay quiet.
Oslo sink with Pro+ Sound Pads covering most of the exterior
Pro+ Sound Pads cover up to 90% of the sink exterior.

Tap Deck

Flexible Tap Deck Configuration

Left hole: 28 mmThe Reeva soap dispenser or a cup rinser (third-party).
Centre hole: 35 mmYour main kitchen tap.
Right hole: 28 mmA second Reeva soap dispenser or a cup rinser (third-party).

Sink is delivered with all 3 hole covers, loosely attached to the holes. Remove a cover to attach a gadget. If you're not using a hole, silicone its cover in place to seal it. Using a third-party fitting? See the compatibility FAQ below.

Choose Your Size

Compare the Three Sizes

60cm 70cm 80cm
Suits 2-3 room homes 3-4 room homes 4 room homes and above
Overall size (mm) 600 × 510 700 × 510 800 × 510
Internal opening (mm) 560 × 470 660 × 470 760 × 470
Bowl front to back 380 mm 380 mm 380 mm
Bowl depth Up to 250 mm, with a 6 mm slope toward the drain
Undermount cutout (mm) 560 × 470 660 × 470 760 × 470
Topmount / flush cutout (mm) 570 × 475 670 × 475 770 × 475
Sink weight 13 kg 14 kg 15 kg
Tap deck holes 28 mm left (Reeva soap dispenser or cup rinser), 35 mm centre (main tap), 28 mm right (second Reeva soap dispenser or cup rinser)
Drain 140 mm, centre of the bowl, toward the rear
Drain connection Wall outlet, floor outlet or hard PVC piping
Cabinet depth Needs a standard 600 mm deep cabinet or deeper

"Suits" is our guide. Please choose by your cabinet's internal width, and confirm with your ID.

Installation

Three Ways to Install

Undermount (Zero Reveal)A clean, seamless look. Crumbs wipe straight into the sink. With a zero reveal, the countertop edge lines up with the sink edge.
TopmountThe simplest and most forgiving method. Suits almost any countertop material.
Flush mount (inset)The rim sits level with the countertop for a built-in look. Discuss with your ID or contractor, as it suits some countertop materials better than others.
Diagram of the three undermount reveal options: positive, zero and negative
Undermount reveal options. Oslo uses a zero reveal.
Your cutout template shows the recommended method and the exact cutting lines for each size. Our Installation, Care & Warranty Guide covers the steps. Both are in Downloads below.

Installing? Hand the Critical Installation Guidelines in Downloads to your contractor for a smooth install. Four pages, English and 中文.

What's Included

A Six-Piece Workstation Suite

  • Solid hardwood cutting board that slides across the top ledge, so juices stay off your countertop.
  • Stainless soak + rinse bin with seal plug to soak vegetables, chill drinks, or rinse and drain.
  • Stainless defrosting tray for defrosting, or as a cover for the soak + rinse bin.
  • Stainless drying rack that drains straight into the bowl.
  • 140 mm drain kit with a 2-stage strainer (top strainer and strainer basket), a drain cover that doubles as a plug, a backflow preventer and a trimmable hose with a stepped adapter. It fits wall outlets and floor outlets, and attaches directly to hard PVC piping.
  • Reeva soap dispenser in a brushed nickel-tone finish to match the Natural sink and tap. One dispenser is included. Some photos show two, because the deck has room for a second. Buy a second Reeva soap dispenser here.
Oslo workstation accessories: cutting board, defrosting tray, drying rack and soak + rinse bin
The workstation accessories.
Two-stage strainer: top strainer, strainer basket and drain cover with the drain below
The 2-stage strainer and drain cover / plug.

The cutting board, defrosting tray and soak + rinse bin nest into one compact stack. Sleek hole covers are included for unused tap holes. All 3 come loosely attached to the holes. Remove a cover to fit a tap or accessory, and silicone it in place to seal any hole you don't use.

Assembled Oslo 140mm drain kit with hose trimming and adapter detail
The 140 mm drain kit. It attaches to wall outlets, floor outlets and hard PVC piping.

Sink + Faucet

Add the Una Faucet and Get a Free Qube Bin

Choose an Una faucet (Natural Steel or Graphite Black) option under Add Una Tap (Optional) and your Qube sensor bin comes with it: Qube 9 is free, Qube 15 is +$20 and Qube 21 is +$40. See the Qube bins.

About the Una faucet
  • Pull-down kitchen mixer in solid 316 stainless steel. Natural Steel with Natural sinks, Graphite Black with Gunmetal sinks.
  • Spanish Sedal ceramic cartridge tested to 500,000 cycles. Swiss Neoperl aerator.
  • Two spray modes, 360-degree swivel and a counterweighted pull-out hose.
  • Water-saving 2-tick PUB rating, under 6 litres per minute.
  • Installed height 42 cm, spout height 20.5 cm, spout projection 23 cm. 5-year parts warranty.

View the Una faucet page

Downloads

Guides, Drawings and Cutout Templates

By Size

For Your Countertop Fabricator

Print cutout templates at 100% (A0 or a plotter). Files open in a new tab.

Care and Warranty

Look After It, and We Look After You

Every Oslo comes with a Limited Lifetime Warranty against material defects, including rust or corrosion caused by a defect in the steel itself, and cracking. Everyday care is simple: dishwashing liquid and a soft sponge. Read the full warranty and care details.

Specifications
  • Model: Oslo V5. Single-bowl workstation sink.
  • Material: 316 marine-grade stainless steel.
  • Finish: Honeycomb embossed texture, with a clear nano coating.
  • Steel thickness: 1.5 mm (16 gauge), uniform across the bowl.
  • Deck rims: 3.0 mm thick.
  • Corners: R10 (10 mm radius).
  • Sound and thermal insulation: Zuhne Pro+ Sound Pads, over 4 mm thick and covering up to 90% of the sink exterior, plus thermal insulation over the entire sink.
  • Installation: Undermount, topmount or flush mount.
  • Tap deck: 28 mm (left), 35 mm (centre), 28 mm (right).
  • Drain: 140 mm, centre of the bowl, toward the rear.
  • Sink weight: 13 kg (60cm), 14 kg (70cm), 15 kg (80cm).
  • Cabinet depth: needs a standard 600 mm deep cabinet or deeper.
  • Accessories: about 400 × 270 mm each (cutting board, defrosting tray, drying rack, soak + rinse bin).
  • Warranty: Limited Lifetime Warranty against material defects.

Questions

Frequently Asked Questions

Will it fit my cabinet?

Oslo needs a standard 600 mm deep cabinet (or deeper). Check the sink's overall length against your cabinet's internal width, and use the size comparison above.

Do I need special support for undermount?

Solid plywood support is strongly recommended, because Zuhne sinks are heavy-duty. Most Singapore installations seat the sink's rim in a recess in the wooden base under the countertop surface. The Installation, Care & Warranty Guide shows how.

How precisely do I need to cut?

Sinks have a size tolerance, so the template is a guide. Aim for the size shown plus 1 mm on each side, never smaller, and dry-fit before sealing.

Is it compatible with third-party cup rinsers and soap dispensers?

Yes, in most cases. Oslo's deck has three pre-drilled holes: 28 mm (left), 35 mm (centre) and 28 mm (right). Here is where each fitting usually goes.

  • Main kitchen tap: The 35 mm centre hole.
  • Cup rinsers: Most need a 28 mm hole, so the left or right hole is the best fit. Cup rinsers have a large base, so the base sits on the countertop, not on the sink deck. The deck is 2 cm below the sink rim, so check the neck length before you buy. For flush mount or topmount, the neck must clear 2 cm. For undermount, the neck must clear 2 cm plus your countertop thickness. For a 2 cm countertop, that means at least 4 cm.
  • Soap dispensers: Most also need a 28 mm hole, so they go in the left or right hole. Zuhne's Reeva soap dispenser fits holes from 28 to 35 mm, so it can go on the left or right.
  • Unused holes: The sink is delivered with all 3 hole covers, loosely attached to the holes. Remove a cover to fit a tap or accessory. If you're not using a hole, silicone its cover in place to seal it.

Please check before you buy: Hole size, neck height and under-deck space differ between brands and models. It is the customer's and contractor's responsibility to check the installation requirements of any third-party product against Oslo's hole sizes and the cabinet layout before buying. We can only confirm compatibility for Zuhne products.

Does water collect on the sink?

The sink base slopes toward the drain, so water tends to drain quicker and pool less. The tap deck has a slight gradient toward the bowl, so water drops on the deck are guided into the sink. As with any sink, a little water can remain after use, and that's normal.

Is the Honeycomb finish scratch-resistant?

Scratch-resistant means it stands up better to everyday use and makes fine marks much harder to see. It does not mean scratch-proof, and no stainless steel is. Dragging heavy pots, steel wool and abrasive pads can still mark it. A sink mat or bottom grid helps in busy areas.

Is the finish permanent?

The Honeycomb texture is embossed into the steel. The clear nano coating over it makes cleaning easier and thins gradually with use. The stainless steel and its texture underneath aren't affected.

Can the drain connect to wall outlets, floor outlets or hard PVC piping?

Yes to all three. The Oslo drain can be attached to wall outlets and floor outlets, and directly to hard PVC piping. The hose can be trimmed at the smooth bands, and the stepped adapter's rings give a firm fit. See the Drain Kit Schematic in Downloads.

What is the difference between Lunar and Honeycomb?

Both textures are embossed into the steel and help resist scratches. Honeycomb's bolder pattern hides micro-scratches best, and Lunar is smoother and easiest to wipe clean.

How quiet is it?

Built to be quiet. Zuhne's own Pro+ Sound Pads are over 4 mm thick (most sinks use about 1 mm) and cover up to 90% of the sink exterior (most cover around 20%). Thermal insulation covers the entire sink. Together they keep running water and clattering pots quiet. We don't quote decibel figures, because noise depends on your faucet, water pressure and what you're washing. The easiest way to judge is to see it in person: visit our Experience Centre to check the build and do a knock test.

Can I see it in person?

Yes. Visit our Experience Centre at Wisma Atria Office Tower, Level 11, 435 Orchard Road. Walk in on weekdays 10am to 6pm and Saturdays 10am to 2pm. Closed on Sundays and public holidays.